In fact, Roxul Safe ’n’ Sound™ is able to withstand the intense heat of temperatures approaching 2150°F (1177°C) without melting. It has been tested and proven* to add to the fire resistance of a partition wall and delay the spread of fire when properly installed. Roxul Safe ’n’ Sound™ can provide potentially life-saving extra time when minutes can make all the difference.

For even better fire resistance and sound absorption, Roxul recommends the use of steel studs in non-load bearing walls.

*National Research Council Canada Report A-4051.1

Roxul Safe ’n’ Sound™ insulation is 25% denser than thermal, exterior wall insulation and the higher density makes it very effective as a barrier to sound. In addition to the density factor, the non-directional fibre structure of each batt creates thousands of tiny, inter-connected voids. These voids trap vibrations created by sound waves that penetrate the wall. Once these vibrations are trapped the sound energy dissipates, significantly reducing the transference of noise from one room to another.

To enhance the sound absorption properties of your partition walls even more, use resilient channels in conjunction with Roxul Safe ’n’ Sound™.

Roxul Safe ’n’ Sound™ comes in two widths for wood stud walls and two widths for steel stud walls. Roxul Safe ’n’ Sound™ batts are 3" thick to ensure a 1/2" gap exists between the face of the insulation batt and the back of the drywall. This gap maximizes performance as a barrier to sound transmission.

Roxul Safe ’n’ Sound™cuts easily with a serrated knife so you can fit batts properly and completely around pipes, electrical boxes and wiring. Always avoid ripping and tearing – you won’t save any time and you’ll compromise the effectiveness of your insulation!

Wiring
Score the batt with a long serrated knife at the height of the wire. Then cut it to approximately half the thickness. Fold the batt back and fit the wire into the opening. Push the batt into place.

For complete home safety, Roxul recommends a planned escape route, the use of smoke detectors and the installation of fire extinguishers in your home.