Techton® 1200 Marine
Techton® 1200 Marine is a rigid mandrel wound pipe product made of strong, preformed stone wool insulation.
Applications:
This product is designed for moisture intense applications, such as steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Engineered for thermal and fire protection in marine applications.
Properties
- Fire resistant; non-combustible, with melting point of approx. 2150°F (1177°C).
- Water and moisture resistant; impregnated with high-water repellent characteristics
- Certificates of Approvals: US Coast Guard, Transport Canada, and Lloyd’s Register
- IMO A.799 and ISO 1182:1990, Annex 1, Part 1 of IMO/FTP Code
- Lasting thermal performance not compromised by water
Technical Data
| Compliance and Performance: | ||
| CAN/CGSB 51.9-92 | Stone Fiber Thermal Insulation for Piping and Round Dutching | Type 1, Class 1, 2 & 3 |
| ASTM C 547 | Standard Specification for Stone Fiber Preformed Pipe Insulation | Type I, II, IV, Complies |
| CAN4 S114 | Test For Non-Combustibility | Non-Combustible |
| ASTM E136 | Behavior Of Materials at 750 C (1382 F) | Non-Combustible |
| IMO A.799 ISO 1182:1990, Annex 1 Part 1, of IMO/FTP Code | Non-Combustibility | Non-Combustible USCG Cert. No. 164.109/27/0 Transport Canada Cert.No. T.C. 261-F1.323 European Cert. No 1408/08 Lloyd’s Register Cert. No. SAS F090282 |
| “A-60” Class Steel Bulkhead And Deck as per IMO/FTP Code A.754 (18)CAN/ULC S102 | See Roxul’s Bulkead & Deck Installation Instructions For 450mm past penetration Surface Burning Characteristics | USCG & European Certification Flame Spread = Passed Smoke Developed = Passed |
| ASTM E 84(UL 723) | Surface Burning Characteristics | Flame Spread = Passed Smoke Developed = Passed |
| ASTM C 411 | Hot Surface Performance | In Compliance with ASTM C547 @ 1200°F (650°C) |
| ASTM C 447 | Maximum Surface Performance | In Compliance with ASTM C547 @ 1200°F (650°C) |
| ASTM C 795 * | Stainless Steel Stress corrosion Specification as per Test Methods C871 and C692: U.S. Nuclear Regulatory Commission, Reg.Guide #1.36: U.S. Military Specifications | |
| ASTM C 356 | Linear Shrinkage | ≤ 1.30% @ 1200°F (650°C) |
| ASTM C 1104 | Moisture Sorption | < 0.1% |
| ASTM C 585 | Inner & Outer Diameters for Nominal Pipe Sizes | Complies |
| ASTM C800 | Wicking | Zero |
| Thermal Conductivity (k): | ||
| ||
| Ambient Temperature: | 75°F | NT: Nominal Thickness |
| Wind speed: | 1 mph | HL: Heat Loss (Btu/ft/hr) |
| Base Metal: | Steel | ST: Surface Temperature (°F) |
| Emittance of outer jacketing: | 0.1 | NPS: Nominal Pipe Size |
Share