English - EN

For Roofs, Hybrid can Mean High Performance

 

Hybrid roof systems combine the benefits of multiple types of insulation to create a high performance roof system. These roofs can satisfy the design needs of many jobs, while saving time and money through material and labor costs.

Polyisocyanurate conventional roof systems typically require two layers of polyiso and a layer of coverboard to satisfy building code and best practice recommendations. Due to the higher R-value per inch (typically published at R5.7/in at mean 75°F), the polyiso insulation allows for a thinner roof assembly which can reduce costs in the parapets or in re-roof applications.

Utilizing a layer of ROXUL TOPROCK® DD or TOPROCK® DD Plus on top of polyiso can allow for the removal of one layer of the polyiso and the coverboard, reducing the material cost and labor needed on the job. In addition, the attributes of these products allow for a higher performing roof. The dimensional stability of TOPROCK® DD and TOPROCK® DD Plus allows for less gapping occurring between the insulation and for less stress to be placed on the membrane. These products also perform well in the case of hail, rated FM 4470 Class 1 – SH (Severe Hail) due to the dual density characteristics of the product allowing the load to be spread out throughout the product. Finally, the layer of stone wool will moderate the temperature the polyiso is exposed to, improving its performance and increasing the energy efficiency.


TOPROCK® DD PLUS

TOPROCK® DD is compatible with most mechanically-fastened membrane systems. TOPROCK® DD Plus is compatible with torch, hot mopped or self-adhered membrane systems and can be adhered to polyiso with most conventional adhesives; satisfying performance requirements.

Need more information on these systems or looking for designs with other membrane attachment methods? Contact your ROXUL sales representative for approved systems with your preferred membrane type or provider.

By combining the two insulating products in one roof system, the overall performance of the roof can be improved in a cost-effective way to satisfy all people involved in the project.

Andrew Lindley - Segment Manager, Roofing

Back